PET850 rechargeable bark collar

The Petrainer PET850 Bark Collar is designed for any size of dog, to stop or limit unwanted barking of your dog.

The PET850 collar is microprocessor-controlled and microphone-activated, along with a vibration sensor, which ensures that the bark collar will only activate if the dog wearing the collar begins to bark, ensuring that your dog is not confused by an accidental correction due to the barking of another dog.

Rechargeable and waterproof you can continue learning your dog even in the rain or in a humid environment.

This necklace has a vibration mode very useful to start gently or in the case of very sensitive dog or in the case of young dogs (between 6 and 9 months following the race) for which it is not advisable to use electric shock, or if you do not even want to use electric shock, you can limit the corrections to the only vibration that is also very effective on most dogs.

The collar has 7 levels of sensitivity to suit all dogs and all environments.

In normal use there are 6 adjustable intensity levels. If the dog stops barking for 30 seconds the collar returns to correction stage number 1, but if the dog manages to activate the maximum stage then the collar will rest for 1 minute, keeping your dog safe.

The collar uses a long battery life that allows a usage time between two charges of about 5 to 14 days depending on the use of the collar.

This anti-bark collar is recommended for dogs of 20 lbs to 150 lbs.

For a small dog less than 20 lbs we prefer to advise you the special collar for small dog also available in our shop.

Operation of the Bark Collar:

1. Load the collar for about 2 hours.
2. Install the electrodes according to the type of hair of your dog (short electrodes for short hairs, and long ones for long hairs) you can tighten the electrodes using the part of the plastic tester provided for this purpose. / li>
3. Turn on the collar by turning the knob marked OFF.
4. Set the intensity level. The first graduation marked V limits the correction to the vibration, there will be no electric shock. The following graduations from 2 to 7 are the different levels of correction 2 being the lowest level corresponds to a duration of short electric shock and low power. Level 7 is the maximum level. The vibration correction is always associated with the electric shock to enhance the effect.
5. You can test the correct operation of the collar by scraping with a plastic object the part marked TEST in the lower part of the box of the anti-bark collar, and applying the tester on the electrodes.
6. Adjust the collar on your dog's neck, but do not tighten too much but check that the electrodes are well placed on the dog's skin.
7. The collar is ready for use.

We do not recommend permanent use of the anti-bark collar, it should not exceed 10 hours per day.

For the first use we advise you to start gradually with the intensity and sensitivity settings in order to adjust them to the best sensitivity of your pet.

Petrainer PET850 Bark Collar Advantage

• Vibration mode
• The collar is adadpted for young dogs
• Anti-Bark Collar Automatic
• Rechargeable and waterproof collar
• Automatic protection mode to avoid over-stimulating the dog
• Double activation prevents accidental triggering
• Multi-color LED battery life indicator
• 7 adjustable sensitivity levels
• 6 levels of intensity
• Vibration mode warning before electrical stimulation

The Pet 850 Bark Kit comes with:

• 1 anti-barking box
• 1 TPU Strap.
• 2 pairs of electrodes (short and long).
• 1 tester
• 1 job mode in English

Weight and dimensions of the anti-bark box:

Size: about 2.2"  (length) * 1.2" (height) * 1.6" (width)

Weight: approx. 2 oz 

TPU collar adjustable from 6" to 24".